The Raspberry Pi® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools.
40.32 (50.00 με ΦΠΑ)
The Pi-DAC+ corresponds to the Raspberry Pi Foundation's HAT specification, includes the HAT auto configure EEPROM, camera and display cut outs, mounting holes and form factor.
Άμεσα Διαθέσιμο
+

[Price will be updated]
The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!
Εξαντλημένο

35.40 33.63 (41.70 με ΦΠΑ)
Εγγύηση: 1 Έτος Εγγύηση Κατασκευαστή
Made in: UK
For Raspberry Pi 3, Broadcom have supported us with a new SoC, BCM2837. This retains the same basic architecture as its predecessors BCM2835 and BCM2836, so...
Άμεσα Διαθέσιμο
+

[Price will be updated]
Made in: China
Our friends over at LinkSprite have made this nifty little RS485 Shield V3 for the Raspberry Pi, now you will be able to have a communication port for your...
Άμεσα Διαθέσιμο

23.39 (29.00 με ΦΠΑ)
The Picade PCB behaves like a keyboard when plugged in via USB and has a default key-mapping (though you can reprogram it using the Arduino IDE)....
+

9.60 (11.90 με ΦΠΑ)
Πληροφορίες: Το προϊόν είναι εξάρτημα και δεν αποτελεί έτοιμη συσκευή.
Made in: China
The Zero Delay USB Arcade Encoder is what you need! It's a fully compatible plug and play solution, simply plug in your joystick and buttons into the encoder, plug the USB cable into the Pi.
Άμεσα Διαθέσιμο
+

[Price will be updated]
Made in: China
We've teamed up with Matt from the Raspberry Pi for Beginners YouTube Channel to create this fantastic YouTube Workshop Kit for the Raspberry Pi. Matt has...

[Price will be updated]
Control your Pi with a flick of the wrist. Skywriter HAT senses the position of your fingers in the air above.
Άμεσα Διαθέσιμο

[Price will be updated]
The Pimoroni Display-O-Tron HAT is a “shield” for the Raspberry Pi that provides you with a 16x3 character LCD, as well as a full ASCII character set that...
Άμεσα Διαθέσιμο

[Price will be updated]
Propeller HAT will get you flying in the world of microcontrollers, whether you’re just learning the ropes, or using it as an integral part of your home automation project.
Άμεσα Διαθέσιμο

[Price will be updated]
Unlock your inner Mozart with Piano HAT with this mini musical companion for your Raspberry Pi!
Άμεσα Διαθέσιμο

[Price will be updated]
If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio!

[Price will be updated]
The PiGlow is a small add on board for the Raspberry Pi that provides 18 individually controllable LEDs.
Άμεσα Διαθέσιμο

[Price will be updated]
Need to detach or debug your HAT? Then the Black HAT Hack3r is for you!

[Price will be updated]
Tinker with WiFi on your Pi Zero with ESP8266 pHAT!

[Price will be updated]
The  Snake Eyes Bonnet  is a  Raspberry Pi accessory  for driving  two 128x128 pixel OLED  or  TFT LCD  displays, and also provides four  analog inputs  for...
Άμεσα Διαθέσιμο

22.76 (28.22 με ΦΠΑ)
Made in: UK
The Raspberry Pi Model A+ is the perfect board for the minimalist Pi fan.
+

22.34 (27.70 με ΦΠΑ)
Made in: USA
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
+

17.48 (21.67 με ΦΠΑ)
Made in: USA
The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and...
+

14.96 (18.55 με ΦΠΑ)
Made in: USA
This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors.
+

25.00 (31.00 με ΦΠΑ)
Made in: USA
You can now create a dazzling display with your Raspberry Pi Model A+/B+/Pi 2 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it...
+

32.52 (40.32 με ΦΠΑ)
The Sense HAT is an add-on board for Raspberry Pi, made especially for the Astro Pi mission! It’s going to the International Space Station in December 2015 – and is now available to buy from ModMyPi.
Άμεσα Διαθέσιμο
+